LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Fuel System (8AR-FTS) - Service Information) >> Fuel Main Valve >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to REMOVAL [08/2015 - ] 

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY 

    See step  2

  3. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY 

    See step  2

  4. REMOVE FUEL PUMP FILTER 

    See step  3

  5. REMOVE FUEL MAIN VALVE ASSEMBLY 
    1. Remove the fuel main valve assembly (for Low Pressure).
      GTY638938Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the clip from the fuel filter.
      2. Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.
        GTY635006Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Protective Tape
        NOTE:
        • Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.
        • Do not damage the fuel filter.
      3. Remove the 2 O-rings from the fuel main valve assembly.
        GTY652718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *1 O-ring
    2. Remove the fuel main valve assembly (for High Pressure).
      GTY638943Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the clip from the fuel filter.
      2. Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.
        GTY622659Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Protective Tape
        NOTE:
        • Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.
        • Do not damage the fuel filter.
      3. Remove the 2 O-rings from the fuel main valve assembly.
        GTY652718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *1 O-ring
scientia non olet · About LEMON Manuals