Inspection [08/2015 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT OIL PRESSURE SWITCHING VALVE ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 13 to 17 Ω If the result is not as specified, replace the oil pressure switching valve assembly.
- Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check that the operating sound of the oil pressure switching valve assembly can be heard.
*a Component without harness connected
(Oil Pressure Switching Valve Assembly)NOTE:- This test must be performed within 10 seconds to prevent the coil from burning out.
- Always turn the voltage on and off at the battery, not the oil pressure switching valve assembly.
If the result is not as specified, replace the oil pressure switching valve assembly.
- Measure the resistance according to the value(s) in the table below.