Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not stored | None |
| All of the following conditions are met | - |
| Engine coolant temperature | 75°C (167°F) or higher |
| Intake air temperature (for mass air flow meter sub-assembly) | -10°C (14°F) or higher |
| Battery voltage | 11 V or higher |
| Atmospheric pressure | 76 kPa(abs) [11 psi(abs)] or higher |
| Engine switch | On (IG) |
| Time after engine start | 10 seconds or more |