Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored | None |
| All of the following conditions are met | - |
| Battery voltage | 8 V or higher |
| Engine switch | On (IG) |
| Starter | Off |
| Solenoid current cut status | Not cut |
| Either of the following conditions is met | 1 or 2 |
| 1. Both of the following conditions are met | - |
| Battery voltage | 12 V or higher |
| Target current | 0.6 A or higher, and less than 0.85 A |
| 2. Both of the following conditions are met | - |
| Battery voltage | 10 V or higher, and less than 12 V |
| Target current | 0.6 A or higher, and less than 0.7 A |
CASE 1
| Either of the following conditions is met | 1 or 2 |
| 1. Both of the following conditions are met | - |
| Battery voltage | 12 V or higher |
| Target current | Less than 0.65 A |
| 2. Both of the following conditions are met | - |
| Battery voltage | 10 V or higher, and less than 12 V |
| Target current | Less than 0.55 A |
CASE 2
| Target current | 0.15 A or higher |