LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Automatic Transmission System (Aa81E) - Service Information (2 Of 2)) >> Kick-Down Switch >> Removal [04/2013 - 08/2015] >> Procedure

Removal [04/2013 - 08/2015]: Procedure

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 2

  2. REMOVE FRONT NO. 1 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 6

  3. REMOVE ACCELERATOR PEDAL ASSEMBLY 

    Refer to REMOVAL [04/2013 - 10/2017]

  4. REMOVE KICK DOWN SWITCH ASSEMBLY 
    1. Disconnect the clip from the body.
      GTY463924Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn back the floor carpet.
      GTY470217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the kick down switch assembly connector.
      GTY470450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disconnect the clamp from the kick down switch assembly.
    5. Remove the nut, 2 bolts and kick down switch assembly from the body.
      GTY464966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals