LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Automatic Transmission System (Aa81E) - Service Information (2 Of 2)) >> Kick-Down Switch >> Installation [10/2017 - ] >> Procedure

Installation [10/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL KICK DOWN SWITCH ASSEMBLY 
    1. Install the kick down switch assembly to the body with the nut and 2 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the clamp to the kick down switch assembly.
    3. Connect the kick down switch assembly connector.
    4. Install the floor carpet to the original position.
      GTY463925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Connect the clip to the body.
  2. INSTALL ACCELERATOR PEDAL ASSEMBLY (for 2GR-FKS) 

    Refer to INSTALLATION [10/2017 - ]

  3. INSTALL ACCELERATOR PEDAL ASSEMBLY (for 8AR-FTS) 

    Refer to INSTALLATION [08/2015 - ]

  4. INSTALL FRONT NO. 1 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 8 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 7 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 7 [11/2021 - ]

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 12 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 11 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 11 [11/2021 - ]

scientia non olet · About LEMON Manuals