LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Cooling System (8AR-FTS) - Service Information) >> Water Pump >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE V-RIBBED BELT 

    Refer to REMOVAL [08/2015 - ]

  2. REMOVE CENTER NO. 4 ENGINE UNDER COVER 

    See step  1

  3. DRAIN ENGINE COOLANT 

    See step  2

  4. REMOVE RADIATOR HOSE SUB-ASSEMBLY 

    See step  12

  5. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY 

    Refer to PROCEDURE - Step 23

  6. REMOVE IDLER PULLEY SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 22

  7. REMOVE ENGINE WATER PUMP ASSEMBLY 
    1. Remove the 5 bolts and engine water pump assembly.
      GTY672723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the gasket from the engine water pump assembly.
scientia non olet · About LEMON Manuals