LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Cooling System (8AR-FTS) - Service Information) >> Water Pump >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE WATER PUMP ASSEMBLY 
    1. Install a new gasket to the engine water pump assembly.
    2. Install the engine water pump assembly with the 5 bolts.

      Torque: 21 N.m (214 kgf/cm, 15 ft.lbf) 

  2. INSTALL IDLER PULLEY SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  3. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY 

    Refer to PROCEDURE - Step 5

  4. INSTALL RADIATOR HOSE SUB-ASSEMBLY 

    See step  7

  5. INSTALL V-RIBBED BELT 

    Refer to INSTALLATION [08/2015 - ]

  6. ADD ENGINE COOLANT 

    See step  3

  7. INSPECT FOR COOLANT LEAK 

    Refer to PROCEDURE - Step 1

  8. INSTALL CENTER NO. 4 ENGINE UNDER COVER 

    See step  5

scientia non olet · About LEMON Manuals