LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Cooling System (8AR-FTS) - Service Information) >> Cooling Fan Motor >> On-Vehicle Inspection [08/2015 - ] >> Procedure

On-Vehicle Inspection [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COOLING FAN MOTOR 
    1. Disconnect the cooling fan motor connector.
      GTY440112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Cooling Fan Motor)
    2. Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.
    3. Measure the current while the cooling fan motor is operating.

      Standard Current

      Condition Specified Condition
      Battery voltage applied at 20°C (68°F) 15.0 to 21.0 A

      If the result is not as specified, replace the cooling fan motor.

    4. Connect the cooling fan motor connector.
  2. CHECK NO. 2 COOLING FAN MOTOR 
    1. Disconnect the No. 2 cooling fan motor connector.
      GTY440112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (No. 2 Cooling Fan Motor)
    2. Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
    3. Measure the current while the No. 2 cooling fan motor is operating.

      Standard Current

      Condition Specified Condition
      Battery voltage applied at 20°C (68°F) 15.0 to 21.0 A

      If the result is not as specified, replace the No. 2 cooling fan motor.

    4. Connect the No. 2 cooling fan motor connector.
scientia non olet · About LEMON Manuals