LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Emission Control System (8AR-FTS) - Service Information) >> Vacuum Regulating Valve >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VACUUM REGULATING VALVE ASSEMBLY 
    1. Install the vacuum regulating valve assembly to the intake manifold with the 2 bolts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

    2. Connect the vacuum transmitting hose assembly and No. 3 vacuum transmitting hose assembly to the vacuum regulating valve assembly.
    3. Connect the vacuum regulating valve assembly connector.
scientia non olet · About LEMON Manuals