LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Emission Control System (8AR-FTS) - Service Information) >> Fuel Tank Cap >> Inspection [09/2020 - ] >> Procedure

Inspection [09/2020 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL TANK CAP ASSEMBLY 
    1. Visually check that the fuel tank cap assembly and gasket are not deformed or damaged.
      GTY444169Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Gasket

      If the fuel tank cap assembly or gasket is deformed or damaged, replace it.

    2. Confirm that ID mark V is printed on the fuel tank cap assembly.
      WARNING:

      Make sure to use a fuel tank cap assembly that has the correct ID mark, or a malfunction may occur in the fuel system.

      GTY768200Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a ID Mark