LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Mechanical System (8AR-FTS) - Service Information (1 Of 2)) >> Front Crankshaft Oil Seal >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FAN AND GENERATOR V BELT 

    Refer to REMOVAL [08/2015 - ] 

  2. REMOVE RADIATOR ASSEMBLY 

    Refer to REMOVAL [08/2015 - ]

  3. REMOVE CRANKSHAFT PULLEY ASSEMBLY 

    Refer to PROCEDURE - Step 10

  4. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL 
    1. Using a screwdriver, pry out the timing gear case or timing chain case oil seal.
      NOTE:
      • Do not damage the surface of the press fit hole or crankshaft.
      • After removing the timing gear case or timing chain case oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.
      GTY671021Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape

      HINT: 

      Tape the screwdriver tip before use.

scientia non olet · About LEMON Manuals