LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Mechanical System (8AR-FTS) - Service Information (1 Of 2)) >> Drive Belt >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE UNDER COVER 

    See step  11 [08/2015 - 10/2016], or see step  11 [10/2016 - 09/2020], or see step  11 [09/2020 - ]

  2. REMOVE V-RIBBED BELT 
    1. Attach a wrench to the hexagonal portion (A) of the V-ribbed belt tensioner assembly as shown in the illustration.
      GTY653853Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a 5 mm hexagon wrench, secure the V-ribbed belt tensioner assembly as shown in the illustration and remove the V-ribbed belt.
      GTY651288Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 5 mm Hexagon Wrench
scientia non olet · About LEMON Manuals