LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Intake / Exhaust System (8AR-FTS) - Service Information) >> Water Pump >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 11 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 11 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 11 [09/2020 - ]

  2. DRAIN COOLANT (for Intercooler) 

    See step  1

  3. REMOVE ELECTRIC WATER PUMP ASSEMBLY 
    1. Disconnect the electric water pump assembly connector.
      GTY639934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Slide the clip and disconnect the No. 5 intercooler cooling water hose from the electric water pump assembly.
      GTY678546Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Slide the clip and disconnect the No. 4 intercooler cooling water hose from the electric water pump assembly.
      GTY639936Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the No. 2 intercooler cooling water hose clamp from the electric water pump bracket sub-assembly.
      GTY639935Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the 2 bolts and electric water pump assembly from the water pump bracket sub-assembly.
      GTY639951Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals