LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Intake / Exhaust System (8AR-FTS) - Service Information) >> Water Pump >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ELECTRIC WATER PUMP ASSEMBLY 
    1. Install the electric water pump assembly to the water pump bracket sub-assembly with the 2 bolts.

      Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf) 

    2. Engage the No. 2 intercooler cooling water hose clamp to the water pump bracket sub-assembly.
    3. Connect the No. 4 intercooler cooling water hose to the electric water pump assembly and slide the clip to secure it.
    4. Connect the No. 5 intercooler cooling water hose to the electric water pump assembly and slide the clip to secure it.
    5. Connect the electric water pump assembly connector.
  2. ADD COOLANT (for Intercooler) 

    See step  2

  3. INSPECT FOR COOLANT LEAK (for Intercooler) 

    See step  1

  4. INSTALL ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 79 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 78 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 78 [09/2020 - ]

scientia non olet · About LEMON Manuals