Installation [10/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
- Apply a light coat of engine oil to the O-ring.
- Using a 22 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly.
Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf)
NOTE:When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.
- Connect the ventilation hose assembly to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.
- INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 5
- INSTALL INTAKE AIR SURGE TANK ASSEMBLY
Refer to INSTALLATION [10/2017 - ]