LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Automatic Transmission System (A760H) - Diagnostic Codes (3 Of 3) & Circuit Tests) >> AUTOMATIC TRANSMISSION SYSTEM (for 2GR-FKS) >> DTC P2756-13: Torque Converter Clutch Pressure Control Solenoid Control Circuit Open [10/2017 - ] >> Description

DTC P2756-13: Torque Converter Clutch Pressure Control Solenoid Control Circuit Open [10/2017 - ]: Description

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

The amount of current flow to the solenoid is controlled by the ECM. During the lock-up operation, if the current increases, the lock-up hydraulic pressure increases.

Fig 1: Torque Converter Clutch Pressure Control Solenoid Diagram
GTY673644Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*a Spool Valve *b Sleeve
*c Solenoid Coil *d Lock-up Operation Pressure
*e Current - -
DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P2756-13 Torque Converter Clutch Pressure Control Solenoid Control Circuit Open While the vehicle is being driven, a short or open is detected in the shift solenoid valve SLU circuit for 1 second (1-trip detection logic).
  • Open or short in shift solenoid valve SLU circuit
  • Shift solenoid valve SLU
  • ECM
Comes on DTC stored SAE Code: P2759