LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Engine Lubrication System (2UR-GSE) - Service Information) >> Oil Pressure Switch >> Inspection [11/2021 - ] >> Procedure

Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the engine oil pressure switch assembly connector.
    2. Start the engine.
    3. Measure the resistance according to the value(s) in the table below.
      GTY1082701Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Engine Oil Pressure Switch Assembly Body

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - Switch body Idling 10 kΩ or higher
      Engine stopped Below 1 Ω

      If the result is not as specified, replace the engine oil pressure switch assembly.

    4. Connect the engine oil pressure switch assembly connector.
scientia non olet · About LEMON Manuals