Typical Enabling Conditions
WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not stored |
None |
| Battery voltage |
8 V or higher |
| Engine switch |
On (IG) |
| Starter |
Off |
| GO: Vehicle speed |
30 km/h (18.65 mph) or more |
| STOP: Vehicle speed |
Less than 3 km/h (1.86 mph) |