LEMON Manuals
: Even more car manuals for everyone
Home
>>
Lexus
>>
2017
>>
IS 300 F Sport
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 166 (Engine Control System (4GR-FSE) - Diagnostic Codes (4 Of 5))
>>
SFI System
>>
DTC P062F: Internal Control Module EEPROM Error [04/2013 - 08/2015]
>>
Typical Enabling Conditions
Typical Enabling Conditions
WARNING:
This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever the following DTCs are not stored
None
All of the following conditions are met
-
Time after engine start
10 seconds or more
Battery voltage
8 V or higher
Engine switch
On (IG)