LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Control System (4GR-FSE) - Diagnostic Codes (4 Of 5)) >> SFI System >> DTC P060B: Internal Control Module A/D Processing Performance [04/2013 - 08/2015] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
CASE 1 AND 4

Monitor runs whenever the following DTCs are not stored None
Both of the following conditions are met -
Battery voltage 8 V or higher
Starter Off
CASE 2 AND 3

Monitor runs whenever the following DTCs are not stored None
scientia non olet · About LEMON Manuals