DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [10/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

REPLACE ECM

Replace the ECM.

Refer to REMOVAL [10/2017 - ]

Result

Proceed to
NEXT

Result:

See step 2

CLEAR DTC

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Clear the DTC.
Powertrain > Engine > Clear DTCs

Turn the engine switch off and wait for at least 30 seconds.

Result

Proceed to
NEXT

Result:

See step 3

CHECK WHETHER DTC OUTPUT RECURS (DTC P2610-29 OR P2610-93)

Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.
Powertrain > Engine > Trouble Codes

If no pending DTC is output, the repair has been successfully completed.

Result

Proceed to
NEXT

Result:

END