Removal [10/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FUEL PRESSURE SENSOR (FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY LH)
Refer to REMOVAL [10/2017 - ]
NOTE:- Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly LH.
- If the fuel pressure sensor is removed, replace the fuel pressure sensor (fuel delivery pipe with sensor assembly LH) with a new one.
- REMOVE FUEL PIPE PLUG SUB-ASSEMBLY
- Secure the fuel delivery pipe with sensor assembly LH in a vise between aluminum plates.NOTE:
Do not overtighten the vise.
- w/ Dust Cap:
- Remove the dust cap sub-assembly from the fuel pipe plug sub-assembly.
- Using a 5 mm hexagon socket wrench, remove the 2 bolts, gasket and fuel pipe plug sub-assembly from the fuel delivery pipe with sensor assembly LH.
- Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe plug sub-assembly.
*1 No. 1 Fuel Injector Back-up Ring *2 No. 2 Fuel Injector Back-up Ring *3 No. 3 Fuel Injector Back-up Ring *4 O-ring *5 Fuel Pipe Plug Sub-assembly - Remove the fuel delivery pipe with sensor assembly LH from the vise.
- Secure the fuel delivery pipe with sensor assembly LH in a vise between aluminum plates.