LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Lubrication System (2GR-FKS) - Service Information) >> Oil Level Sensor >> Inspection [10/2017 - ] >> Procedure

Inspection [10/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ENGINE OIL LEVEL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY778914Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Engine Oil Level Sensor)
      *b Body Ground
      *c ON
      *d OFF

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - Body ground ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the engine oil level sensor.