LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Emission Control System (4GR-FSE) - Service Information) >> Fuel Tank Cap >> Inspection [04/2013 - 08/2015] >> Procedure

Inspection [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL TANK CAP ASSEMBLY 
    1. Visually check that the fuel tank cap assembly and gasket are not deformed or damaged.
      GTY462799Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Gasket

      If the result is not as specified, replace the fuel tank cap assembly.

    2. Confirm that ID mark S is printed on the fuel tank cap assembly.
      GTY433387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a ID Mark
      WARNING:

      Make sure to use a fuel tank cap assembly that has the same ID mark, or a malfunction may occur in the fuel system.

scientia non olet · About LEMON Manuals