LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Automatic Transmission System (A960E) - Service Information) >> Speed Sensor >> Inspection [04/2013 - 08/2015] >> Procedure

Inspection [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY468834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Transmission Revolution Sensor (NT))
      STANDARD RESISTANCE

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the result is not as specified, replace the transmission revolution sensor (NT).

  2. INSPECT TRANSMISSION REVOLUTION SENSOR (SP2) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY468834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Transmission Revolution Sensor (SP2))
      STANDARD RESISTANCE

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the result is not as specified, replace the transmission revolution sensor (SP2).

scientia non olet · About LEMON Manuals