LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Automatic Transmission System (A960E) - Service Information) >> Shift Paddle Switch >> Installation [04/2013 - 08/2015] >> Procedure

Installation [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) 
    1. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the No. 1 switch wire to the 2 shift paddle switches (transmission shift switch assemblies).
    2. Engage the 5 guides to install the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire to the steering wheel assembly.
    3. Install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly with 4 new screws.

      Torque: 1.7 N.m (17 kgf/cm, 15 in.lbf) 

    4. Connect the No. 1 switch wire connector.
    5. Connect the No. 1 switch wire connector clamp to the steering wheel assembly.
  2. INSTALL STEERING WHEEL ASSEMBLY 

    Refer to INSTALLATION [04/2013 - 10/2016]

scientia non olet · About LEMON Manuals