LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Automatic Transmission System (A960E) - Service Information) >> Shift Lever >> Removal [04/2013 - 08/2015] >> Procedure

Removal [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) 

    Refer to REMOVAL [04/2013 - 08/2015]

  2. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR 

    Refer to PROCEDURE - Step 2

  3. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Move the shift lever to N.
    2. Remove the nut and separate the floor shift gear shifting rod sub-assembly from the lever of the transmission floor shift assembly.
      GTY459034Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Lever
  4. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [04/2013 - 10/2016]

  5. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. Disconnect the 2 clamps from the No. 1 console box duct.
      GTY464970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clips and No. 1 console box duct.
      GTY470451Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. Disconnect the transmission control switch connector.
      GTY464968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 4 clamps from the transmission floor shift assembly.
    3. Disconnect the shift lock control ECU connector.
      GTY464974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 4 bolts and transmission floor shift assembly from the body.
      GTY464975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals