LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Automatic Transmission System (A960E) - Service Information) >> Combination Switch >> Removal [04/2013 - 08/2015] >> Procedure

Removal [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 2

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 3

  4. REMOVE FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 4

  5. REMOVE FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 5

  6. REMOVE CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8

  7. REMOVE LEXUS DISPLAY AUDIO CONTROLLER (for Radio and Display Type) 

    Refer to PROCEDURE - Step 7

  8. REMOVE REMOTE TOUCH (for Multi-Media Module Receiver Type) 

    Refer to PROCEDURE - Step 7

  9. REMOVE COMBINATION SWITCH ASSEMBLY 
    1. Disengage the 7 claws and remove the combination switch assembly from the upper console panel sub-assembly.
      GTY457174Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE CLIP 

    HINT: 

    Perform this procedure only when replacement of the clip is necessary.

    1. Remove the 4 clips from the combination switch assembly.
      GTY464965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals