LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Automatic Transmission System (A960E) - Service Information) >> Combination Switch >> Installation [04/2013 - 08/2015] >> Procedure

Installation [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CLIP 

    HINT: 

    Perform this procedure only when replacement of the clip is necessary.

    1. Install the 4 clips to the combination switch assembly.
  2. INSTALL COMBINATION SWITCH ASSEMBLY 
    1. Engage the 7 claws to install the combination switch assembly to the upper console panel sub-assembly.
  3. INSTALL LEXUS DISPLAY AUDIO CONTROLLER (for Radio and Display Type) 

    Refer to PROCEDURE - Step 1

  4. INSTALL REMOTE TOUCH (for Multi-Media Module Receiver Type) 

    Refer to PROCEDURE - Step 1

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  6. INSTALL FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 11

  7. INSTALL FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 10

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 13

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 12

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

scientia non olet · About LEMON Manuals