Typical Enabling Conditions
WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not present |
None |
| All of the following conditions are met |
- |
| Battery voltage |
8 V or higher |
| Engine switch |
On (IG) |
| Starter |
Off |
| Time after engine switch off to on (IG) |
3 seconds or more |
| Vehicle speed at output speed sensor |
9 km/h (5.59 mph) or higher |