Inspection [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CAMSHAFT TIMING CONTROL MOTOR WITH EDU ASSEMBLY
HINT:
Use the same procedure for the camshaft timing control motor with EDU assembly LH and camshaft timing control motor with EDU assembly RH.
- Rotate the joint of the camshaft timing control motor with EDU assembly by hand and check that it rotates smoothly.
Standard Condition
The motor rotates smoothly.
NOTE:- If the camshaft timing control motor with EDU assembly has been struck or dropped, replace it.
- Do not disassemble the camshaft timing control motor with EDU assembly. If disassembled, replace it.
- Make sure the contact surface of the camshaft timing control motor with EDU assembly (connecting surface with the timing chain cover assembly) is free of foreign matter.
If the result is not as specified, replace the camshaft timing control motor with EDU assembly.
- Rotate the joint of the camshaft timing control motor with EDU assembly by hand and check that it rotates smoothly.