Removal [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE ENGINE ASSEMBLY WITH TRANSMISSION
Refer to REMOVAL [11/2021 - ]
- REMOVE AIR FUEL RATIO SENSOR (for Bank 1)
- Disconnect the air fuel ratio sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the wire harness clamp.
- Using SST, remove the air fuel ratio sensor from the exhaust manifold sub-assembly LH.
NOTE:
If the air fuel ratio sensor has been struck or dropped, replace it.
- REMOVE AIR FUEL RATIO SENSOR (for Bank 2)
- Disconnect the air fuel ratio sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the wire harness clamp.
- Using SST, remove the air fuel ratio sensor from the exhaust manifold sub-assembly RH.
NOTE:
If the air fuel ratio sensor has been struck or dropped, replace it.