LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Fuel System (2UR-GSE) - Service Information) >> Fuel Pump Ecu >> Installation [11/2021 - 09/2022] >> Procedure

Installation [11/2021 - 09/2022]: Procedure

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP CONTROL ECU 
    1. Install the fuel pump control ECU to the vehicle body with the 2 nuts.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

      NOTE:

      Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

    2. Connect the 2 fuel pump control ECU connectors.
    3. Install the luggage compartment trim cover LH with the 4 clips.
    4. Install the rope hook assembly with the bolt.
    5. Engage the 2 claws to close the cover.
  2. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 6

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 2

  4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 12

  5. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 13

  6. INSTALL LUGGAGE COMPARTMENT DOOR STRIKER COVER 

    Refer to PROCEDURE - Step 14

  7. INSTALL DECK SIDE TRIM BOX RH 

    Refer to PROCEDURE - Step 15

  8. INSTALL DECK SIDE TRIM BOX LH 

    Refer to PROCEDURE - Step 16

  9. INSTALL SPARE WHEEL COVER TRAY RH 

    Refer to PROCEDURE - Step 17

  10. INSTALL SPARE WHEEL COVER TRAY LH 

    Refer to PROCEDURE - Step 18

  11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 

    Refer to PROCEDURE - Step 19

scientia non olet · About LEMON Manuals