LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine Control System (2UR-GSE) - Diagnostic Codes (1 Of 4)) >> SFI System >> DTC P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control [11/2021 - ] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
Related DTCs P0125: Insufficient engine coolant temperature for closed loop fuel control rationality
Required Sensors/Components (Main) Engine coolant temperature sensor
Thermostat
Cooling system
Required Sensors/Components (Related) -
Frequency of Operation Once per driving cycle
Duration 70 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 8.33°C [46.994°F]) or higher
129 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 19.44°C [66.992°F]) or higher, and less than (closed-loop engine coolant temperature - 8.33°C [46.994°F])
1200 seconds: Engine coolant temperature at engine start is less than (closed-loop engine coolant temperature - 19.44°C [66.992°F])
MIL Operation 2 driving cycles
Sequence of Operation None