Typical Enabling Conditions
WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| The monitor will run whenever the following DTCs are not present | None |
| Solenoid current cut status | Not cut |
| Engine switch | On (IG) |
| Starter | OFF |
CONDITION (A)
| When one of following conditions is met | Condition (1), (2) or (3) |
| Condition (1): Battery voltage | 12 V or more |
| Condition (2) | - |
| - Battery voltage | 10 V or more and less than 12 V |
| - Target current | Less than 0.75 A |
| Condition (3) | - |
| - Battery voltage | 8 V or more |
| - Target current | 0.25 A or more |
CONDITION (B)
| Battery voltage | 11 V or more |
| Target current | 0.9 A or more |
CONDITION (C)
| Battery voltage | 11 V or more |
| Target current | 0.1 A or more |
| Difference between target voltage and last target voltage | Little to no difference |