LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Control System (2UR-GSE) - Diagnostic Codes (3 Of 4)) >> SFI System >> DTC P1023: Camshaft Position Signal Output "B" Circuit; DTC P2614: Camshaft Position Signal Output Circuit / Open [11/2021 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever the following DTCs are not stored None
Both of the following conditions are met -
Battery voltage 11 V or higher
Engine switch On (IG)