LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Automatic Transmission System (Aa80E) - Diagnostic Codes (1 Of 2)) >> Automatic Transmission System >> DTC P0724: Brake Switch "B" Circuit High [11/2021 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.

The stop light switch remains on during GO and STOP 5 times.

GO and STOP are defined as follows:

The monitor will run whenever the following DTCs are not present None
GO (Vehicle speed is 30 km/h (18.63 mph) or more) Once
STOP (Vehicle speed is less than 3 km/h (1.86 mph)) Once
Battery voltage 8 V or more
Engine switch On (IG)
Starter OFF