Customize Parameters [08/2019 - ]: Procedure
- CUSTOMIZE METER / GAUGE SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Utility / Customize / Warning or Display.
- Select the setting by referring to the table below.WARNING
Tester Display Default Content Setting Relevant ECU Driver Side Seatbelt Warning Buzzer ON Enables sounding of the driver seat belt warning buzzer* ON or OFF Combination meter assembly Front Passenger Side Seatbelt Warning Buzzer ON Enables sounding of the front passenger seat belt warning buzzer* ON or OFF Combination meter assembly Flasher Sound Volume Adjustment Medium Function to change the flasher sound volume Large, Medium or Small Combination meter assembly Flasher Sound Tone Setting Tone 1 Function to change the flasher sound tone Tone 1, Tone 2 or Tone 3 Combination meter assembly - *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.
DISPLAYTester Display Default Content Setting Relevant ECU ODO Display Time After IG OFF Setting 30s Function to change the ODO display time after the engine switch is turned off 30s, 60s 600s or OFF Combination meter assembly
- Customizing with the multi-information display
- Turn the engine switch on (IG).
- Enter the following menus: Settings.
- Select the setting by referring to the table below.SETTINGS
Display Description Default Setting ECU Language Function to change the language on the display English English, French, or Spanish Combination meter assembly Units Function to change the units on the display miles (MPG) (for mph Type)
km (L/100 km) (for Km/h Type)km (km/L), km (L/100 km) or miles (MPG) Combination meter assembly ECO Driving Indicator Light (Symbol) Function to activate/deactivate the ECO driving indicator light On Off or On Combination meter assembly Switch Settings Function to change the screen assigned to the TOP button on the steering pad switch assembly - - Combination meter assembly Pop-up Display Function to change the interrupt display setting of each item - - Combination meter assembly Default Settings The setting items can be initialized - - Combination meter assembly