LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GS 200t Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> HEADUP Display Switch >> Installation [09/2014 - ] >> Procedure

Installation [09/2014 - ]: Procedure

  1. INSTALL HEADUP DISPLAY SWITCH ASSEMBLY 
    1. Attach the 4 claws to install the headup display switch assembly.
  2. INSTALL TRIP SWITCH 

    See step  1

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 23 [09/2014 - 10/2015] or refer to PROCEDURE - Step 22 [10/2015 - ]

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 24 [09/2014 - 10/2015] or refer to PROCEDURE - Step 23 [10/2015 - ]

  5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 26 [09/2014 - 10/2015] or refer to PROCEDURE - Step 25 [10/2015 - ]

  6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 27 [09/2014 - 10/2015] or refer to PROCEDURE - Step 26 [10/2015 - ]

  7. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28 [09/2014 - 10/2015] or refer to PROCEDURE - Step 27 [10/2015 - ]

  8. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 29 [09/2014 - 10/2015] or refer to PROCEDURE - Step 28 [10/2015 - ]

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 6

  10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 8

  11. ENABLE AUTOAWAY/RETURN FUNCTION 
    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter (Refer to CUSTOMIZE PARAMETERS [09/2014 - ] ).
scientia non olet · About LEMON Manuals