How To Proceed With Troubleshooting (07/2015 -): Procedure

Result

Result:  1

NEXT 

See step  2

Result

Result:  1

NEXT 

See step  3

1. Check if CAN communication DTCs are output (Refer to DIAGNOSIS SYSTEM (07/2015 - 08/2016) Refer to DIAGNOSIS SYSTEM (08/2016 -) w/ Central Gateway ECU, Refer to DIAGNOSIS SYSTEM (07/2015 - 08/2016) Refer to DIAGNOSIS SYSTEM (08/2016 -) w/o Central Gateway ECU).

   Result

   Result	Proceed to
   CAN communication DTCs are not output	A
   CAN communication DTCs are output (w/ Central Gateway ECU)	B
   CAN communication DTCs are output (w/o Central Gateway ECU)	C

Result:  2

B 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING (07/2015 -) )

Result:  3

C 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING (07/2015 -) )

Result:  1

A 

See step  4

1. Check for DTCs (Refer to DTC CHECK / CLEAR (07/2015 -) ).

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result:  2

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART (07/2015 -) )

Result:  1

A 

See step  5

Result

Result:  1

NEXT 

See step  6

Result

Result:  1

NEXT 

See step  7

1. Refer to Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE (07/2015 - 08/2016) Refer to PROBLEM SYMPTOMS TABLE (08/2016 -) ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

See step  9

Result

Result:  1

NEXT 

See step  10

Result

Result:  1

NEXT 

END