LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System (Diagnostics - Introduction) (1 Of 2) >> Meter / Gauge System >> Customize Parameters (07/2015 -) >> Procedure

Customize Parameters (07/2015 -): Procedure

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Warning or Display.
      5. Select the setting by referring to the table below.
        NOTE:
        • Be sure to record the current value before customizing.
        WARNING

        Tester Display Default Content Setting Relevant ECU
        Flasher Sound Volume Adjustment Medium Function to change the flasher sound volume Medium, Small, Large Combination meter assembly
        Lane Change Flashing Times Setting 3 Function to change the lane change flashing times OFF, 3, 4, 5, 6, 7 Combination meter assembly
        DISPLAY

        Tester Display Default Content Setting Relevant ECU
        ODO Display Time After IG OFF Setting 30s Function to change the ODO display time after engine switch is turned off 30s, 60s, 600s, OFF Combination meter assembly
scientia non olet · About LEMON Manuals