How To Proceed With Troubleshooting [07/2015 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

Result

Result:  1

NEXT 

See step  3

1. Check if CAN communication DTCs are output. Refer to DIAGNOSIS SYSTEM [07/2015 - 08/2016] Refer to DIAGNOSIS SYSTEM [08/2016 - ] w/ Central Gateway ECU, or Refer to DIAGNOSIS SYSTEM [07/2015 - 08/2016] , or Refer to DIAGNOSIS SYSTEM [08/2016 - ] w/o Central Gateway ECU).

   Result

   Result	Proceed to
   CAN communication DTCs are not output.	A
   CAN communication DTCs are output (w/ Central Gateway ECU).	B
   CAN communication DTCs are output (w/o Central Gateway ECU).	C

Result:  2

B 

GO TO CAN COMMUNICATION SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2015 - ]

Result:  3

C 

GO TO CAN COMMUNICATION SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2015 - ]

Result:  1

A 

See step  4

1. Check for DTCs. Refer to DTC CHECK / CLEAR [07/2015 - ] .

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B

Result:  2

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ]

Result:  1

A 

See step  5

Result

Result:  1

NEXT 

See step  6

Result

Result:  1

NEXT 

See step  7

1. Refer to Problem Symptoms Table. Refer to PROBLEM SYMPTOMS TABLE [07/2015 - 08/2016] , or Refer to PROBLEM SYMPTOMS TABLE [08/2016 - ] .

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

See step  9

Result

Result:  1

NEXT 

See step  10

Result

Result:  1

NEXT 

END