Typical Enabling Conditions
| Monitor runs whenever the following DTCs are not stored | P0010, P0020, P1023, P1360, P1361, P1362, P1363, P1364, P1365, P1366, P1367, P2614 (Motor drive VVT system control module bank 1, 2) P0016, P0018 (VVT system bank 1, 2 - misalignment) P0102, P0103 (Mass air flow meter) P0115, P0117, P0118 (Engine coolant temperature sensor) P0125 (Insufficient engine coolant temperature for closed loop fuel control) P0335 (Crankshaft position sensor) P1340 (Camshaft position sensor) |
| Battery voltage | 11 V or higher |
| Engine speed | 425 to 4000 rpm |
| Engine coolant temperature | 75 to 120°C (167 to 248°F) |