LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> LS 600h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Diagnostic Codes & Symptom Tests >> Symptom Tests >> Tachometer Malfunction [09/2015 - ] >> Procedure

Tachometer Malfunction [09/2015 - ]: Procedure

  1. CHECK CAN COMMUNICATION SYSTEM 
    1. Check for DTC (Refer to DIAGNOSIS SYSTEM [09/2015 - ] ).
      RESULT

      Result Proceed to
      CAN communication system DTC is not output A
      CAN communication system DTC is output B

    Result:  B

    B 

    Go to CAN COMMUNICATION SYSTEM 

    (Refer to PRECAUTION [09/2015 - ] )

    Result:  A

    A 

    See step  2

  2. PERFORM ACTIVE TEST USING TECHSTREAM (TACHOMETER) 
    1. Operate the Techstream according to the display and select "Active Test".
      COMBINATION METER

      Tester Display Test Part Control Range Diagnostic Note
      Tachometer operation Tachometer 0, 1000, 2000, 3000, 4000, 5000, 6000 or 7000 -

      OK

      Needle indication is normal.

    Result:  NG

    NG 

    REPLACE NO. 1 METER ECU 

    (Refer to DISASSEMBLY [09/2015 - ] )

    Result:  OK

    OK 

    See step  3

  3. READ VALUE USING TECHSTREAM (ENGINE SPEED) 
    1. Operate the Techstream according to the display and select "Data List".
      COMBINATION METER

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Engine Rpm Engine speed / Min.: 0, Max.: 12750 Idling: 700 to 800 Unit: rpm

      OK

      Engine speed displayed on the Techstream is almost the same as actual engine speed.

    Result:  OK

    OK 

    REPLACE NO. 1 METER ECU 

    (Refer to DISASSEMBLY [09/2015 - ] )

    Result:  NG

    NG 

    See step  4

  4. READ VALUE USING TECHSTREAM (ENGINE SPEED) 
    1. Operate the Techstream according to the display and select "Data List".
      HYBRID CONTROL

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Engine Revolution Engine speed / Min.: 0, Max.: 16383.75 Idling: 950 to 1050 Unit: rpm

      OK

      Engine speed displayed on the Techstream is almost the same as the actual engine speed.

    Result:  NG

    NG 

    Go to HYBRID CONTROL SYSTEM 

    (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] )

    Result:  OK

    OK 

    See step  5

  5. REPLACE NO. 1 METER ECU 
    1. Temporarily replace the No. 1 meter ECU with a new one (Refer to DISASSEMBLY [09/2015 - ] ).

    Result:  NEXT

    NEXT 

    See step  6

  6. CHECK NO. 1 METER ECU 
    1. Check that the operation of the tachometer returns to normal (Refer to OPERATION CHECK [09/2015 - ] ).

      OK

      Operation of tachometer returns to normal.

    Result:  OK

    OK 

    END (NO. 1 METER ECU IS DEFECTIVE) 

    Result:  NG

    NG 

    REPLACE HYBRID VEHICLE CONTROL ECU 

    (Refer to REMOVAL [09/2015 - ] )