LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> IS 350 Base, RWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission System (Aa81E) - Service Information (1 Of 2) >> Shift Lever >> Removal [09/2020 - ] >> Procedure

Removal [09/2020 - ]: Procedure

  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 2GR-FKS) 

    Refer to REMOVAL [09/2020 - ]

  2. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 8AR-FTS) 

    Refer to REMOVAL [09/2020 - ]

  3. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR 

    Refer to PROCEDURE - Step 3

  4. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Move the shift lever to N.
    2. Remove the nut and separate the floor shift gear shifting rod sub-assembly from the lever of the transmission floor shift assembly.
      GTY462357Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Lever
  5. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [09/2020 - 11/2021] , or refer to REMOVAL [11/2021 - ]

  6. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. Disengage the clamp from the No. 1 console box duct.
      GTY968865Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clips and No. 1 console box duct.
      GTY968731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. Disconnect the shift lock control ECU connector.
      GTY464968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 4 clamps from the transmission floor shift assembly.
    3. Disconnect the transmission control switch connector.
      GTY464974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 4 bolts and transmission floor shift assembly from the vehicle body.
      GTY464975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals