Customize Parameters [04/2013 - 08/2015]

CUSTOMIZE METER / GAUGE SYSTEM

Customizing with the Techstream

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Warning or Display.

Select the setting by referring to the table below.

NOTE:

Be sure to record the current value before customizing.

Warning

Tester Display	Description	Default	Setting	ECU
Flasher Sound Volume Adjustment	Function to change the flasher sound volume	Medium	10:Large, 00:Medium, 01:Small	Combination meter assembly

Display

Tester Display	Description	Default	Setting	ECU
ODO Display Time After IG OFF Setting	Function to change the ODO display time after the engine switch is turned off	30s	00:30s, 01:60s, 10:600s, 11:OFF	Combination meter assembly

Customizing with the combination meter assembly

Turn the engine switch on (IG).
Enter the following menu: Settings.

Select the setting by referring to the table below.

NOTE:

Be sure to record the current value before customizing.

SETTINGS

Combination Meter Assembly Display	Description	Default	Setting	ECU
Language	Function to change the language on the display	English	English, French or Spanish	Combination meter assembly
Units	Function to change the units on the display	miles (MPG)	km (km/L), km (L/100km), miles (MPG)	Combination meter assembly
ECO driving indicator light (Symbol)	Function to activate/deactivate the eco driving indicator light	ON	ON or OFF	Combination meter assembly
Switch Settings*2	Function to change the screen assigned to the TOP button on the steering pad switch assembly	Drive Info 1	Drive Info 1 Drive Info 2 Eco drive indicator TPMS display Gear position Blank Navigation display Audio display Phone display Cruise control main switch operation guide display Message display Setting display	Combination meter assembly
Drive Info 1	Function to change the item to be displayed on Drive Info 1	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset)	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset, After Start, After Refuel) Average Speed (After Reset, After Start) Elapsed Time (After Reset, After Start) Distance (Range, After Start) Other (Blank)	Combination meter assembly
Drive Info 2	Function to change the item to be displayed on Drive Info 2	Average Speed (After Reset) Distance (Range)	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset, After Start, After Refuel) Average Speed (After Reset, After Start) Elapsed Time (After Reset, After Start) Distance (Range, After Start) Other (Blank)	Combination meter assembly
Interrupt Display	Function to change the interrupt display setting of each item	ON	ON or OFF	Combination meter assembly
Accent Color*2	Function to change the cursor color when selecting a displayed item	Red	Blue or Red	Combination meter assembly
Needle*1	Function to change the needle color	Blue	Blue, Red or White	Combination meter assembly
Speed Indicator*1	Function to enable/disable the vehicle speed indicator function (when set to ON, set vehicle speed can be changed)	OFF	ON or OFF (30 to 100 mph)3 (50 to 120 km/h)4	Combination meter assembly
Rev Indicator*1	Function to enable/disable engine speed indicator function (when set to ON, set engine speed can be changed)	OFF	ON or OFF (2000 to 6600 rpm)	Combination meter assembly
Rev Peak*1	Function to enable/disable display of an afterimage of the tachometer needle at a peak engine speed	ON	ON or OFF	Combination meter assembly

*1: for F SPORT models
*2: except F SPORT models
*3: for Speedometer with imperial units for main scale
*4: for Speedometer with metric units for main scale