LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> IS 350 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Trip Switch >> Installation [04/2013 - ] >> Procedure

Installation [04/2013 - ]: Procedure

  1. INSTALL TRIP SWITCH 
    1. Engage the 2 claws to install the trip switch.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 34 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 35 [10/2016 - 10/2017] , or refer to PROCEDURE - Step 35 [10/2017 - 09/2020] , or refer to PROCEDURE - Step 33 [09/2020 - ]

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 35 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 36 [10/2016 - 10/2017] , or refer to PROCEDURE - Step 36 [10/2017 - 09/2020] , or refer to PROCEDURE - Step 34 [09/2020 - ]

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 36 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 37 [10/2016 - 10/2017] , or refer to PROCEDURE - Step 37 [10/2017 - 09/2020] , or refer to PROCEDURE - Step 35 [09/2020 - ]

scientia non olet · About LEMON Manuals