LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> GS 450h Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System (Diagnostics) >> Meter / Gauge System >> Customize Parameters [09/2014 - 10/2015] >> Procedure

Customize Parameters [09/2014 - 10/2015]: Procedure

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Combination Meter / Warning or Display.
      5. Select the setting by referring to the table below.
        WARNING

        Display Default Content Setting Relevant ECU
        Driver Side Seatbelt Warning Buzzer* ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer* ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Flasher Sound Volume Adjustment Large Function to change the flasher sound volume Large, Medium or Small Combination meter assembly
        • *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more
        DISPLAY

        Display Default Content Setting Relevant ECU
        ODO Display Time After IG OFF Setting 30 s Function to change the odometer display time 30 s, 60 s, 600 s or OFF Combination meter assembly
    2. Customizing with the combination meter assembly
      1. Turn the power switch on (IG).
      2. Enter the following menus: Settings.
      3. Select the setting by referring to the table below.
        METER SETTING

        Display Default Content Setting Relevant ECU
        Language English Function to change the multi-information display language English, Francais or Espanol Combination meter assembly
        Units miles (MPG) Function to change the multi-information display unit km (km/L), km (L/100km) or miles (MPG) Combination meter assembly
        ECO lamp ON (Self-lighting) Function to turn on/off the eco light ON (Self-lighting), OFF or ON (Always) Combination meter assembly
        Drive monitor Outside Function to change the drive monitor setting Fuel consumption, Cruising range or Outside Combination meter assembly
        Tachometer Settings ON (Self-changing) Function to change the tachometer or hybrid system indicator setting ON (Self-changing), HV Meter (Always) or Tachometer (Always) Combination meter assembly
        Lamp brightness Standard Function to change the meter illumination setting Bright or Standard Combination meter assembly
        SPORT lamp ON Function to turn on/off the SPORT light setting ON or OFF Combination meter assembly
        EV driving Indicator ON Function to turn on/off the EV mode indicator light setting ON or OFF Combination meter assembly
        Default settings OFF Function to turn on/off the default setting ON or OFF Combination meter assembly
scientia non olet · About LEMON Manuals