DTC C2176/76: Receiver Error [03/2014 - ]: Procedure

CHECK DTC OUTPUT (C2176/76)
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [03/2014 - ] .
2. Turn the engine switch off.
3. Turn the engine switch on (IG) and check for DTCs. Refer to DTC CHECK / CLEAR [03/2014 - ] .
  OK
  
  DTC C2176/76 is not output.
NG → See step 2

OK → END
REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER. Refer to REMOVAL [03/2014 - ]